Collaboration with LuxAI S.A. on the design and development of the QTrobot, a tool for therapists to support education of children with autism.
Spare part for electric sunroof
Our client had an issue with his electric sunroof on his car, the metal slider on one side was broken due to material wear.
Since he could not find any replacement parts on the market we managed to reproduce the broken part, our engineering team optimized the part by adding material on certain sections of the part. The material we used was stainless steel, which got polished to work properly.
Scientific research project
For scientific research our client is currently testing a prototype, we adapted their parts for additive manufacturing in order to do the first field tests of their project.
We used Nylon PA12 for this mechanical application.
Custom made wall mount for a Wlan Router
Main task was to provide the client with a custom made wall mount for a Wlan Router, we’ve designed, engineered and produced the frame for this application.
The material we used was Nylon PA22 in order to get the right geometric stability and surface finish.
La centrale d’énergie Kirchberg de Luxenergie
La centrale d’énergie Kirchberg de Luxenergie a été transformée pour recevoir les énergies renouvables. Une grande chaudière à pellets assurera dorénavant une grande partie de la production d’énergie.
Pour expliquer aux visiteurs les flux parfois complexes des pellets, de la vapeur d’eau produite, de l’eau chaude et de l’énergie électrique nous avons produit une maquette multi-couleur.
La maquette est réalisée en nylon et fait 1240 x550 x 650 mm. L’échelle est le 1/75.
Technik schnell erklärt
Für das Gemeindesyndikat Distribution d’eau des Ardennes haben wir das Modell eines geplanten Trinkwasserbehälters erstellt.
Anhand dieses Modells können komplexe Verläufe und Bestimmungen der verschiedenen Rohrleitungen anschaulich dargestellt werden. Verschiedenfarbige Pfeile und Symbole sorgen dafür, dass Zufuhr, Versorgung, Entleerung, Überlauf, Belüftung und Pumpen sofort erkennbar sind.
Erstellt wurde das Modell in Nylon im Maßstab 1/100
Stronger than the original: aluminium
That shiny piece is chromalised plastic and it was to feeble for its function in a shower. On top of that spare parts are impossible to get.
So for our client we made a spare part and it is a lot tougher than the original part because it has been created in 3D-printed aluminium. The file necessary for printing was created with 3D-Scanning technology and CAD-design.
Maquette en bronze
En juillet-août 2016 nous avons utilisé l’impression 3D pour produire une maquette en bronze du nouveau Centre de jeunesse Märjendall. De 2010 à 2016 l’Administration des bâtiments publics a procédé à une rénovation complète de l’ancien monastère. Architecte du projet est Léon Glodt et le Studio Polenta a assuré la signalétique du projet. Sur la maquette en bronze, placée dans la cour du centre, les différents bâtiments et places du centre sont numérotés et une légende facilite aux visiteurs du centre de s’y retrouver.
Légende comprise la maquette fait 1035 x 759 mm. Elle a été coulée en bronze de 6mm d’épaisseur par notre partenaire suisse.
Le bronze est une matière qui est très bien adaptée aux maquettes exposées aux intempéries.
Make it bigger
Some time ago we produced a batch of 1/100 reproductions of the satellite dishes engineered and produced by HITEC Luxembourg.
Now we took the same project to a new scale and produced 3 reproductions in scale 1/33,3 of each their LM06 and their LM09 antennas.
Whereas the smaller 1/100 models are well suited as a gift, the new bigger models are to be shown at expos and in meetings.
HITEC Luxembourg offers high technology, value-added solutions covering multiple business areas: satellite ground segment technology; customer-specific and standard equipment for testing and measuring of physical properties; engineering; consulting; software & ICT development and project management.
HITEC Luxembourg serves private and public sector customers at a national and international level in more than 30 countries worldwide.
Fit 4 Innovation
What’s better to celebrate innovation than … an innovation.
For the Fit for innovation program established by Luxinnovation Patisserie Schumacher from Wormeldange has produced chocolates reflecting the logo of the program.
The moulds used to produce the chocolates were designed and produced by 3DPrint.lu. All that was needed was the two-dimensional file of the logo.
Before production of the mould rendered images helped validate the design.
